New Mexico has had the highest pedestrian death rate in the country for eight years running, according to the Governors Highway Safety Association, at 4.41 deaths per 100,000 people in 2024. Bernalillo County accounted for 48 of the state's 94 pedestrian deaths that year, more than half, per NMDOT and UNM data. On many late-model cars, automatic emergency braking for pedestrians depends on a camera mounted to the windshield. When the glass is replaced, that camera has to be re-aimed to the maker's specification, or it may misjudge the distance to someone stepping off a curb.
We calibrate eligible cameras and supported radar at your home or office in Albuquerque after glass or front-end work.
We provide calibration services only. We do not perform mechanical repairs, body work, or sensor replacement.
When Does Pedestrian Braking
Need Calibration?
Whenever the camera or radar, or what they're mounted to, may have moved. Your maker's procedure decides exactly when.
After Windshield Replacement
On most newer cars, the forward camera that spots pedestrians and lane lines is mounted to the windshield. A replacement moves it onto new glass, so it has to be calibrated to its new position before the system can be trusted.
Collision or Fender-Bender
A minor bump to the front bumper or grille can shift a radar sensor without visible damage, and automatic braking may react late or at the wrong moment.
Suspension or Wheel Alignment Work
An alignment, new tires or suspension work changes how the car sits, and the camera reads the road and crosswalks from that new angle.
After Sensor or Camera Replacement
If a camera or radar unit was replaced, a qualified repair facility installs and programs it first. We calibrate it afterward so it aims where the maker specifies before you drive.
Supported ADAS Calibration Services
WindshieldHUB calibrates forward cameras and supported radar on eligible vehicles in Albuquerque, following each maker's procedure for that model.
Types of ADAS Calibration
We Offer
Your vehicle's maker sets the calibration method its camera and radar need after glass work.
Static ADAS Calibration
Targets are placed at measured distances in front of the parked car on level ground. A flat driveway, garage or lot usually works, and a sheltered spot helps on windy days. We confirm the space before the visit.
Dynamic ADAS Calibration
Done on the road. The car is driven at set speeds on streets with clear lane markings while the camera relearns its aim. Blowing dust can delay it.
Dual ADAS Calibration
Some models need a target setup and then a road drive. Both have to be finished before the calibration record is final.
ADAS Calibration Near Albuquerque
We calibrate eligible vehicles at homes, offices and suitable lots across Albuquerque. After any windshield work, get the calibration done before relying on pedestrian braking, and take extra care on busy corridors like Central Avenue at dusk. We confirm your location and the space needed when you book.
New York City, NY San Antonio, TX Kansas City, MO Memphis, TN Los Angeles, CA Dallas, TX Jacksonville, FLAnd Many More 
Albuquerque Calibration Quote & Timing
Pricing depends on the vehicle and its maker's procedure, and a car using both camera and radar for pedestrian braking may need two calibrations.
Vehicle year make and model- Calibration type (static, dynamic, or dual ADAS calibration)
- OEM calibration requirements
- System complexity and the number of sensors involved
Timing depends on the vehicle, the method, any fault codes the pre-scan finds and conditions on the day, since dynamic calibration needs clear lane lines and decent visibility. If a sensor is damaged rather than just misaimed, we stop and tell you instead of calibrating it. You get an estimate after we review your VIN.
Get Your Free Quote For RecalibrationOur
ADAS Calibration Process in Albuquerque
Each calibration we do follows the same four steps.
Pre-Calibration System Scan
A diagnostic scan checks the camera and radar for stored fault codes before any setup begins.
Windshield Replacement
Static, dynamic or dual calibration, as the vehicle's maker requires.
Post-Calibration Verification
A post-calibration scan confirms the camera and radar read correctly.
Calibration Report
You receive a written report showing what was calibrated and the result.
Why Choose WindshieldHUB
for ADAS Calibration?
Trained
Technicians
Technicians follow each maker's calibration steps for cars, SUVs and pickups, including pedestrian detection systems.
Procedure-Matched
Equipment
Targets and scan tools chosen for your make's procedure.
Calibration
Reports
A written report you can keep with your glass or claim records.
Fully Mobile
Service
We come to your Albuquerque home or office when the site has level, sheltered space for setup.
Scheduling Support
Available
Help timing calibration right after your windshield replacement.
Before & After
Why ADAS Calibration Matters
Schedule Your ADAS Calibration
Send your VIN, ZIP code and the date of your windshield replacement or front-end repair. We'll confirm the procedure and space needed. Same-day calibration may be available depending on the procedure and weather. Until it's done, drive as if pedestrian braking isn't there.
Book Your ADAS Calibration TodayFrequently Asked Questions
Find answers to frequently asked questions about adas calibration
ADAS calibration aims a vehicle's cameras and radar at the maker's reference points, so pedestrian detection, automatic braking and lane keeping see the road correctly.