A leveling kit on a pickup, a lift on a Jeep, bigger tires or even a routine alignment changes the angle the vehicle sits at and the direction it travels. The forward camera and radar were calibrated to the old stance. Raise the front by an inch or two and the camera looks at the road from a different angle, which can throw off lane keeping and automatic braking.
WindshieldHUB calibrates ADAS cameras and sensors after these changes. For windshield and auto glass work, see our Dallas auto glass page.
We provide calibration services only. We do not perform mechanical repairs, body work, or sensor replacement.
When Dallas Drivers
Need ADAS Recalibration After Changing the Vehicle?
A camera or sensor may need recalibrating any time the vehicle's height, wheel angles or tire size change, or when the part it's mounted to is replaced. The vehicle maker's procedure says which changes require it.
After Windshield Replacement
The forward camera sits behind the windshield, so a new windshield usually means calibration. On a lifted truck, it's done at the truck's current ride height.
After Completed Collision or Body Work
Bumper, grille and bracket repairs can move radar and cameras. If you're fitting an aftermarket bumper or grille, check whether it blocks or moves the sensors.
After Alignment, Lift or Suspension Work
Leveling kits, lift kits, lowering springs and alignments all change the angle the sensors point at. Many vehicle makers call for calibration afterwards.
After Camera or Sensor Replacement
A new or relocated camera or radar unit has to be calibrated before it works properly, including radar moved for an aftermarket bumper, where the maker allows it.
Windshield Camera and ADAS Sensor Calibration in Dallas After Modifications
WindshieldHUB's Dallas ADAS calibration covers the forward windshield camera and supported radar units on cars, SUVs and pickups. After a lift, leveling kit or tire change, we check the new ride height and tire size against what the maker's procedure allows, then calibrate the systems your vehicle has, using the method the maker specifies. Services include:
ADAS Calibration
Types Available in Dallas, TX
The vehicle maker decides which method each system needs. A modified vehicle uses the same methods, measured at its new height and tire size.
Static ADAS Calibration
Static calibration uses targets placed at measured distances while the vehicle sits on level ground. On a lifted truck, target height is set from the truck's actual stance.
Dynamic ADAS Calibration
Dynamic calibration means driving at set speeds on roads with clear lane markings. Larger tires change the speed the vehicle reads, which can affect this method.
Dual ADAS Calibration
Some vehicles need a static calibration followed by a drive. After a lift or tire change, the drive also confirms the systems behave normally on the road.
Mobile ADAS Calibration Across Dallas
Get mobile ADAS calibration at your home, shop or workplace in Dallas, as long as there's level ground and enough room in front of the vehicle. Lifted trucks need a little more space for targets.
Downtown Dallas Uptown Oak Lawn Design District Lake Highlands North Dallas Oak CliffAnd Many More 
ADAS Calibration Quote Timing Factors After Modifications
Every vehicle has different calibration requirements. On a modified vehicle, the quote also depends on what was changed, since a lift and new tires can mean more than one system.
Vehicle Year, Make, Model, and VIN- Required Calibration Method
- Number of Supported ADAS Systems
- Site, Road, and Weather Conditions
Send your VIN and tell us what changed: the lift or leveling kit height, the tire size, any aftermarket bumper, and whether an alignment was done afterwards. That tells us which systems need calibrating and whether the vehicle is within the maker's range. We'll confirm the method, the time it takes and an appointment.
Get Your Free Quote For RecalibrationOur Dallas
ADAS Calibration Process After a Lift or Alignment
Every calibration follows the same four steps, whatever was changed:
VIN and Prerequisite Review
Share the VIN, Dallas ZIP code, lift or tire details and alignment records. We confirm the alignment was done after the suspension work.
Pre-Scan and Calibration Setup
A pre-scan checks the relevant modules and fault codes. The technician measures ride height and checks tire size before setting up targets or planning the drive.
Manufacturer-Specified Calibration
Static, dynamic or dual calibration is performed following the maker's procedure, at the vehicle's measured height and with the tire size it's actually running.
Post-Scan and Digital Report
A post-scan confirms the systems work and no codes remain. You get a report showing the calibration result and the measurements it was based on.
Why Choose WindshieldHUB for ADAS
Calibration on a Modified Vehicle in Dallas?
ADAS-Focused
Technicians
Technicians follow the maker's procedure and check ride height and tire size before starting any calibration.
Procedure-Matched
Equipment
Targets, diagnostic tools and calibration equipment are set up for your vehicle, including target heights adjusted for a lifted stance.
Digital Calibration
Documentation
You receive a record of the calibration and measurements, which is useful if you sell the vehicle or make a claim.
Mobile Dallas
Service
We come to a suitable home, office, workplace or shop in Dallas, including the shop that installed the lift.
Scheduling
Support
Our team confirms vehicle details, the modifications and the alignment before booking, so the calibration happens once the vehicle is ready for it.
Why Accurate
ADAS Calibration Matters on Dallas Roads After a Lift?
Schedule ADAS Calibration in Dallas, TX
Schedule mobile ADAS calibration in Dallas after your lift, leveling kit, tire change or alignment. Send the VIN, what was changed and the shop's paperwork if you have it. If a warning light came on after the work, mention it. We'll confirm whether calibration is needed and possible, then book a time at your home, office or the shop.
Book Your ADAS Calibration TodayFrequently Asked Questions
Find answers to frequently asked questions about adas calibration
ADAS calibration sets the cameras and radar behind lane keeping, adaptive cruise and automatic braking so they read the road correctly, for example after a lift or alignment.