The body shop has fixed the bumper, the grille or the mirror, and the car looks right again. The cameras and radar behind those parts may not be. A new bumper cover, a refitted radar bracket or a replaced mirror can shift what the sensors see by a fraction of a degree, and the safety systems then need recalibrating before they work the way the maker designed them to.
We bring calibration to your home, office or the shop in Memphis once repairs are complete. For windshield and other auto glass work, see our Memphis auto glass page.
ADAS calibration only, mechanical repairs, collision/body work, wheel alignment, and camera or sensor replacement must be completed before service.
When Do Memphis Drivers
Need ADAS Calibration After a Collision?
Calibration is needed whenever a repair moves or replaces something a camera or sensor is mounted to, or changes how the vehicle sits. After a collision, that can be several repairs at once, and the order matters.
After Windshield Replacement
If the collision cracked the windshield, the forward camera mounted behind it comes off with the old glass. Once the new windshield is in and cured, the camera needs calibrating to the new glass.
After Collision Repairs
Front radar often sits behind the bumper cover or grille emblem, and side radar sits behind the rear bumper corners. Replacing or refitting those panels can change the sensor angle, even when the sensor itself wasn't damaged.
After Alignment or Suspension Work
Collisions often bend a tie rod or knock the wheels out of alignment. The calibration has to come after the alignment, because the cameras are set relative to the direction the wheels point the vehicle.
After Camera or Sensor Replacement
If the body shop replaced a damaged radar unit, mirror camera or bracket, the new part needs calibrating before the system will work properly. We calibrate the part the shop fitted; we don't supply or install it.
ADAS Camera & Sensor Calibration in Memphis After Body Work
After body work in Memphis, WindshieldHUB calibrates the supported cameras and sensors that the repair may have disturbed, following the vehicle maker's procedure for each one, including:
Types of ADAS Calibration
We Perform After a Collision
The vehicle maker sets which method each system needs. After a collision, a car may need more than one type, depending on what was repaired.
Static ADAS Calibration
Static calibration is done with the vehicle parked on level ground, with targets placed at measured distances. It's common for front radar behind a new bumper and for cameras after a windshield replacement.
Dynamic ADAS Calibration
Dynamic calibration is done by driving the vehicle on roads with clear lane markings, at the speeds the maker specifies, until the system learns its position again. Traffic and weather affect it.
Dual ADAS Calibration
Some vehicles need both: a static calibration with targets, followed by a road drive. After collision repairs that touched the front end of the car, this is fairly common.
Mobile ADAS Calibration Across Memphis
We come to your home, your office or the body shop in Memphis once the repairs are finished, provided there's level ground and enough space in front of the vehicle for the targets.
Downtown Central Gardens Cooper-Young Whitehaven Raleigh Frayser Shelby CountyAnd Many More 
Your ADAS Calibration Quote After Collision Repairs
Every calibration quote is vehicle-specific. After a collision, send the VIN and a copy of the body shop's repair estimate or invoice, because the parts they replaced tell us which systems need calibrating and in what order.
Vehicle year, make, model, and trim- Static, dynamic, or dual calibration requirements
- Manufacturer-specific procedures
- Number and type of systems requiring calibration
Once we've reviewed the VIN and repair list, we'll confirm the calibration needed and a time. If your insurer is paying for the collision repair, ask whether calibration is included in the claim.
Get Your Free Quote For RecalibrationOur 4-Step
ADAS Calibration Process After Body Repairs
Every Memphis calibration after a collision follows the same four steps, starting with a check that the repairs are actually finished and the alignment is correct.
Pre-Calibration Scan
A diagnostic scan reads stored fault codes and confirms which systems are fitted and which parts the body shop replaced.
Required Calibration
The technician performs the static, dynamic or dual calibration that each system needs, following the vehicle maker's published procedure.
Post-Calibration Verification
After calibration, a second scan confirms the systems are working and no fault codes remain. Any warning lights left on are explained before we leave.
Calibration Documentation
You get a written record of the calibration, including the pre-scan and post-scan results, which body shops and insurers often ask to see.
Why Memphis Drivers Choose WindshieldHUB
for ADAS Calibration After Repairs?
ADAS-Trained
Technicians
Our technicians follow each vehicle maker's calibration procedure and know which collision repairs usually affect which camera or sensor on a car.
Vehicle-Specific
Calibration
Your VIN and the body shop's repair list tell us which systems are fitted and which ones need calibrating after the work.
Calibration
Documentation
The written record of the calibration and both scans can go to you, the body shop or your insurer, whichever needs it.
Fully Mobile
Service
We calibrate at your home, office or the body shop, when the site has level ground and enough room, so the car doesn't need another trip.
Scheduling
Support
Our team can coordinate with the body shop so the calibration is booked after the repairs and alignment are done.
Why ADAS Calibration
Matters After a Collision in Memphis
Schedule Mobile ADAS Calibration in Memphis After Your Repair
If the body shop says the car needs calibration, or a warning light came on after the repair, send us the VIN, the repair estimate and where the car is. We'll confirm the calibration and book a time.
Book Your ADAS Calibration TodayFrequently Asked Questions
Find answers to frequently asked questions about adas calibration
ADAS calibration resets the cameras and sensors behind features like lane keeping, adaptive cruise and automatic braking, so they read the road correctly after their position has changed, for example after a collision repair.